Site Search


Feature Item

Weinig Rondamat 934 Profile Grinder
Code: 1422

Circa 1998 Good used condition Manual included "As is, where is" condition


Name: Geoff Strang

Ph: +64 9 276 2402
Cell: +64 274 304 981
Contact Us

Sawmilling | T720 OPT (Omga) Optimised Docker

Code: 1379

Programmable automatic upstroking machine for defecting and optimising wood.


The machine is equipped with an infeed bar device, for pieces to be cut, which is completely automatic and computerised. Panels are cut to have working pieces from 3000 mm (optional 4000 / 5000 / 6000 mm). A reading station in the infeed carriage, detects both the marks made by the operator from the very beginning to the end of each defect to eliminate and the bar length.
The machine is equipped with a motorised outfeed belt from 2500mm to evacuate the pieces cut. The computer, with a monochromatic video from 8” can memorise cutting from a max. of 20 lines each with quantity of pieces. The cutting lists can be memorised in two different ways:
  • Directly on the computer line
  • On the external PC to which you have to transmit the data by a disc from 3 ½”.
By using the different available programmes you can perform pre-determined cutting sequences.
  • cut without defecting
  • optimising without defecting
  • optimising and defecting
The computer on the T 720 OPT can perform seven different programmes to achieve as many cycles; the device also updates the following data:
  • quantity of material in cubic meters to produce the pieces memorised in each working list,
  • the number of pieces to be performed for each measure,
  • quantity of material produced in cubic meters for:
-         1st quality, - 2nd quality, - 3rd quality.
-         pcs. For finger jointing, - waste quantity in cubic meters to produce the remaining pieces.
The machine can be equipped with accessories and three different devices to select the outfeed cutting pieces:
  • mechanical work piece sorter (2000 mm)*
  • sorting roller
  • single side NC work piece pneumatic sorter (4000 mm)
  • pneumatic ejector
  • two side NC work piece sorter (4000 mm)
  • additional ejecting unit
*All dimensions indicated are the actual working measures.

PDF: Image_Standard_composition_of_machine_T_720_OPT-42259

Enquire Today

Name  *
Company *
Phone *
Email  *
Address  *
Product of Interest 
Comments  *
Please enter the verification code in the image above *